Introduction To Stainless Steel Filter Element

Stainless steel filter element is a kind of filter element. The main filter material is made of multi-layer stainless steel sintered mesh. Stainless Steel filter has very good filtration performance and can exert uniform surface filtration performance for filtration particle sizes of 2-200um. The main filter material uses multi-layer stainless steel sintered mesh, with a filtration precision of 0.5-200um. Its overall dimensions can be processed according to user requirements.

performance

It has various porosity (28%-50%), pore diameter (4u-160u) and filtration precision (0.2um-100um). The pores are crisscrossed and resistant to high temperature and rapid cooling and heating. Anti-corrosion. Suitable for a variety of corrosive media such as acids and alkalis. The stainless steel filter element can withstand general acid, alkali and organic corrosion, and is especially suitable for filtration of sulfur-containing gases. It has high strength and good toughness. It is suitable for high-pressure environments. It can be welded. Easy to load and unload. Stable hole shape and even distribution ensure stable filtration performance. Good regeneration performance. After repeated cleaning and regeneration, the filtration performance recovers by more than 90%.

Main features

1. Good filtration performance and uniform surface filtration performance for filtration particle sizes of 2-200um;
2. It has good corrosion resistance, heat resistance, pressure resistance and wear resistance; it can be washed repeatedly and has a long service life.
3. The stainless steel filter element has uniform pores and precise filtration accuracy;
4. The stainless steel filter element has a large flow rate per unit area;
5. The stainless steel filter element is suitable for low and high temperature environments; it can be used again after cleaning and does not need to be replaced.

Application scope

Petrochemical and oil field pipeline filtration; fuel filtration of refueling equipment and engineering machinery equipment; filtration of water treatment industry equipment; 7 pharmaceutical and food processing fields; rated flow 80-200l/min, working pressure 1.5-2.5pa, filter area (m2) 0.01-0.20 Filtration precision (μm) 2-200 μm Filter material Stainless steel woven mesh Stainless steel punched mesh is used for water removal in the front stage of heavy oil combustion systems, and can also be used for chemical liquid filtration. The accuracy is 100um. The filter element material is stainless steel round microporous mesh. It is suitable for pretreatment and post-treatment systems in industrial sectors such as electronics, petroleum, chemical industry, medicine, and food. Further purify water with low suspended impurities (less than 2~5mg/L).