ONLY Technology (hebei Province) Co., Ltd.

If you are interested in our products, you can choose to leave your information here, and we will be in touch with you shortly.


dust collector filter cartridge manufacturers

Nov . 13, 2026 00:58 Back to list

How Industrial Air Filter Cartridges Fit Dust-Control Systems

Industrial air filter cartridges work best when the media, cleaning cycle, sealing arrangement, and housing dimensions match the dust-control system. We supply cylindrical and pleated options for fan dust removal, duct cleaning, powder spraying, sandblasting, pigment and wood processing, compressed-air filtration, powder recovery, and workshop dust removal, with treated media and custom dimensions for defined operating needs.

How Industrial Air Filter Cartridges Fit Dust-Control Systems
Illustration for reference; see the product page for actual photos and specifications.

Industrial air filter cartridges should be selected around the dust source and the equipment that holds them. Our cartridges use surface filtration, where an air-permeable tissue on the filter material captures particulate matter. The available construction choices cover cylindrical chuck-type elements and pleated dust-collector cartridges, with media, frames, seals, end caps, and dimensions matched to the installation.

Where it is used

1Fan dust removal and central air-conditioning duct cleaning
2Powder spraying and sandblasting operations
3Pigment production and wood processing
4Compressed-air filtration and industrial dust collectors
5Powder recovery and factory workshop dust removal

01

Fan dust removal and air-conditioning duct cleaning

Fan dust removal and central air-conditioning duct cleaning need a cartridge that seats correctly in the housing and limits leakage at the connection. Our cylindrical elements use a specialized sealing rubber ring and an electro-galvanized central skeleton. The skeleton supports the filter structure and resists rust, while the seal maintains the connection between the element and housing.

Long-fiber polyester suits systems that clean the cartridge with pulse backwash. Its interlaced, evenly distributed fibers provide wear resistance, and its stiffness allows repeated washing. This makes the material a practical fit where airflow cleaning is part of the operating routine. For a replacement, compare the existing housing with the cartridge's end-cap arrangement and seal location before ordering.

02

Powder spraying and sandblasting

Powder spraying and sandblasting expose filter media to abrasive dust and repeated cleaning. These systems need wear resistance, internal support, and a connection that remains suitable for the dust collector. Our imported long-fiber polyester addresses the wear and pulse-backwash requirements. A plastic end cap or a stamped, non-porous galvanized iron end cap can be selected for the cartridge design.

The polyester can also receive oil-proof, waterproof, or anti-static treatment. Select the treatment according to the condition around the dust stream. The electro-galvanized central skeleton and specialized rubber ring complete the checks for support and sealing in this type of installation.

03

Pigment production and wood processing

Pigment production and wood processing use dust-removal equipment that must capture airborne particulate matter at the filter surface. Our cylindrical cartridges provide surface filtration for these applications. Material choices include wood pulp fiber filter paper, spunbond polyester fiber non-woven fabric, metal wire mesh, and polyester options.

The best configuration depends on the dust and cleaning arrangement. Long-fiber polyester fits a process that needs wear resistance and pulse backwash. Wood pulp fiber or spunbond polyester can be selected when the equipment design calls for those media, while metal wire mesh is available for the filter-material requirement described for the cartridge range. Send the current element or housing drawing when the replacement must follow an existing connection.

04

Compressed air and industrial dust collectors

Chuck-type dust filter cartridges filter dust from compressed air and support simple installation, use, and maintenance. Pleated cartridges provide a larger filtering area and dust-holding capacity for industrial dust collection systems. These options fit equipment where the buyer must balance the installed form with the dust load and cleaning method.

The dust-collector range includes polyester, cellulose, and composite filter media. Metal or plastic inner and outer frames can be selected for the collector design. The same product range is used for powder recovery, factory workshop dust removal, metallurgy, building materials, wood processing, and chemical industry applications. For these systems, confirm the dust source, filter media, frame arrangement, and cleaning method as one selection decision.

05

Match the cartridge to the installation

The housing dimensions and connection determine whether a cartridge can be installed. Common cylindrical specifications include a 12.75'' diameter with heights of 13.84'' or 26''. Metric specifications include 325660mm and 350660mm. We also make special specifications according to user requirements.

CheckAvailable approach
Filtration formSurface filtration or pleated structure
MediaLong-fiber polyester, wood pulp, spunbond polyester, metal wire mesh, cellulose, or composite
End capPlastic or stamped non-porous galvanized iron plate
FrameMetal or plastic inner and outer frame options
SupportElectro-galvanized central skeleton
SealSpecialized sealing rubber ring
TreatmentOil-proof, waterproof, or anti-static polyester
DimensionsCommon sizes or special specifications

A pulse-cleaned installation should use a material with the needed wear resistance and stiffness. A system exposed to oil, water, or static conditions can use the corresponding polyester treatment. A nonstandard collector needs the dimensions and connection details that define its replacement element. Our industrial air filter cartridges can be configured around these equipment checks.

Our approach

Use cylindrical or pleated cartridges with the media, support, seal, frame, treatment, and dimensions matched to the dust-control equipment. Long-fiber polyester fits wear and pulse-backwash demands; treated polyester addresses oil, water, or static conditions; custom specifications support nonstandard housings.

Check before you order

Match media to the dust source and cleaning method
Confirm housing dimensions, connection, end cap, frame, and seal
Check wear resistance for abrasive dust and pulse backwash
Select oil-proof, waterproof, or anti-static treatment when required
Provide a sample or drawing for special specifications

Questions that affect the final configuration

Which end cap suits a sealed dust collector connection?

A plastic end cap or a stamped non-porous galvanized iron end cap can suit the cartridge design. The choice follows the collector connection and the required end-cap construction. Check how the existing element sits in the housing and whether the replacement needs the same end-cap material and shape. Include a sample or drawing when the connection cannot be identified from measurements alone.

Can the frame material be changed for a dust collector?

Yes, metal or plastic inner and outer frames are available for the dust-collector design. Frame selection should follow the collector structure and the way the cartridge is supported during filtration and cleaning. Provide the installed frame arrangement with the requested media so we can align the replacement configuration with the equipment.

What information supports a custom cartridge request?

A drawing, existing sample, or user-defined specification supports custom production. We make special diameter and height specifications, and the dust-collector range also supports custom filter media and filter efficiency. Include the connection arrangement and media requirement so the requested cartridge can be matched to the equipment instead of treated as a standard replacement.

Prepare the right cartridge request

Choose long-fiber polyester for abrasive dust and pulse backwash, treated polyester for oil, water, or static conditions, and pleated or cylindrical construction according to the collector design. Our industrial air filter cartridges suit the listed dust-control applications when the media and housing are matched. For a quote, send the current cartridge sample or drawing with the dust source and cleaning method.

The company

ONLY Technology (hebei Province) Co., Ltd.

ONLY TECHNOLOGY (HEBEI PROVINCE) CO., LTD is a company specializing in the production and sales of air purification equipment. We have advanced production equipment and technical team, dedicated to providing customers with high-quality dust removal filter cartridge products and solutions.…

About Us ↗Visit company website ↗

Copyright © 2026 ONLY Technology (hebei Province) Co., Ltd. All Rights Reserved. Sitemap | Privacy Policy | Top Blog | Global Service | Hot Products | Knowledge

If you are interested in our products, you can choose to leave your information here, and we will be in touch with you shortly.